Ronin-2-Specifications

Electrical and Mechanical
Working Current	Static: 300 mA (at 22.8 V) Dynamic: 500 mA (at 22.8 V) Locked Motor: Up to 15 A (at 22.8 V)

Performance
Payload Capacity	30 lb / 13.6 kg
Precision of Control	± 0.02°
Maximum Controlled Rotation Speed	Pan Axis: 400°/s Tilt Axis: 360°/s Roll Axis: 360°/s
Controlled Rotation Range	Pan Axis Control: 360° continuous rotation Tilt Axis Control: +45° to -135° Roll Axis Control: ±45°
Battery Life	Maximum: 8 hours Typical when Powering Camera/Accessories: 2.5 hours

Gimbal Controller
CPU	32-bit ARM processor
Sensors	Independent IMU module Temperature sensors
Positioning	GPS
Operation Modes	Underslung Mode Upright Mode Briefcase Mode
Interface	Built-in touch panel

Receiver
Frequency	2.4 GHz / 5.8 GHz switchable

Connectivity
Wireless	Bluetooth 4.0
Wired	1 x D-Bus 1 x USB Type-C
Accessory Power Ports	4 x 14.4 V Camera Cage (combined 8 A) 2 x 12.6 V Pan Motor (combined 4 A) 1 x 12.6 V P-Tap (8 A)

System Requirements
Assistant Software	Windows: 7 or above macOS: 10.11 or above iOS: 9 or above Android: 4.4 or above

Battery
Chemistry	Lithium-ion polymer
Capacity	4280 mAh / 97.58 Wh
Voltage	22.8 V
Note	Compatible with Inspire 2 flight battery. Not compatible with batteries for prior Ronin models.

General
Camera Tray Dimensions	Maximum Depth from the Center of Gravity on Camera Baseplate: 9.6" / 245 mm Maximum Height Measured from Top of the Camera Baseplate: 6.5" / 165 mm Maximum Width: 7.1" / 180 mm
Mounting Compatibility	Handheld Car Mount Aerial Tripod Steadicam Note: Separately available mounting hardware may be required.
Operating Temperature	-4 to 122°F / -20 to 50°C
Dimensions (W x D x H)	Including Handle Bar: 24.8 x 16.4 x 28.3" / 630 x 416 x 720 mm Excluding Handle Bar: 13.8 x 16.4 x 20.9" / 350 x 416 x 530 mm
Weight	Including Handle Bar: 12 lb / 5.5 kg Excluding Handle Bar: 9 lb / 4.2 kg